Icon HelpCircleForumIcon Link

⌘K

Icon HelpCircleForumIcon Link
Testing With Rust

Icon LinkTesting with Rust

A common use of Sway is for writing contracts or scripts that exist as part of a wider Rust application. In order to test the interaction between our Sway code and our Rust code we can add integration testing.

Icon LinkAdding Rust Integration Testing

To add Rust integration testing to a Forc project we can use the sway-test-rs cargo generate template Icon Link. This template makes it easier for Sway developers to add the boilerplate required when setting up their Rust integration testing.

Let's add a Rust integration test to the fresh project we created in the introduction .

Icon Link1. Enter the project

To recap, here's what our empty project looks like:

$ cd my-fuel-project
$ tree .
├── Forc.toml
└── src
    └── main.sw

Icon Link2. Install cargo generate

We're going to add a Rust integration test harness using a cargo generate template. Let's make sure we have the cargo generate command installed!

cargo install cargo-generate
Icon InfoCircle

Note: You can learn more about cargo generate by visiting the cargo-generate repository Icon Link.

Icon Link3. Generate the test harness

Let's generate the default test harness with the following:

cargo generate --init fuellabs/sway templates/sway-test-rs --name my-fuel-project --force

--force forces your --name input to retain your desired casing for the {{project-name}} placeholder in the template. Otherwise, cargo-generate automatically converts it to kebab-case. With --force, this means that both my_fuel_project and my-fuel-project are valid project names, depending on your needs.

If all goes well, the output should look as follows:

⚠️   Favorite `fuellabs/sway` not found in config, using it as a git repository: https://github.com/fuellabs/sway
🤷   Project Name : my-fuel-project
🔧   Destination: /home/user/path/to/my-fuel-project ...
🔧   Generating template ...
[1/3]   Done: Cargo.toml
[2/3]   Done: tests/harness.rs
[3/3]   Done: tests
🔧   Moving generated files into: `/home/user/path/to/my-fuel-project`...
✨   Done! New project created /home/user/path/to/my-fuel-project

Let's have a look at the result:

$ tree .
├── Cargo.toml
├── Forc.toml
├── src
│   └── main.sw
└── tests
    └── harness.rs

We have two new files!

  • The Cargo.toml is the manifest for our new test harness and specifies the required dependencies including fuels the Fuel Rust SDK.
  • The tests/harness.rs contains some boilerplate test code to get us started, though doesn't call any contract methods just yet.

Icon Link4. Build the forc project

Before running the tests, we need to build our contract so that the necessary ABI, storage and bytecode artifacts are available. We can do so with forc build:

$ forc build
  Creating a new `Forc.lock` file. (Cause: lock file did not exist)
    Adding core
    Adding std git+https://github.com/fuellabs/sway?tag=v0.24.5#e695606d8884a18664f6231681333a784e623bc9
   Created new lock file at /home/user/path/to/my-fuel-project/Forc.lock
  Compiled library "core".
  Compiled library "std".
  Compiled contract "my-fuel-project".
  Bytecode size is 60 bytes.

At this point, our project should look like the following:

$ tree
├── Cargo.toml
├── Forc.lock
├── Forc.toml
├── out
│   └── debug
│       ├── my-fuel-project-abi.json
│       ├── my-fuel-project.bin
│       └── my-fuel-project-storage_slots.json
├── src
│   └── main.sw
└── tests
    └── harness.rs

We now have an out directory with our required JSON files!

Icon InfoCircle

Note: This step may no longer be required in the future as we plan to enable the integration testing to automatically build the artifacts as necessary so that files like the ABI JSON are always up to date.

Icon Link5. Build and run the tests

Now we're ready to build and run the default integration test.

$ cargo test
    Updating crates.io index
   Compiling version_check v0.9.4
   Compiling proc-macro2 v1.0.46
   Compiling quote v1.0.21
   ...
   Compiling fuels v0.24.0
   Compiling my-fuel-project v0.1.0 (/home/user/path/to/my-fuel-project)
    Finished test [unoptimized + debuginfo] target(s) in 1m 03s
     Running tests/harness.rs (target/debug/deps/integration_tests-373971ac377845f7)

running 1 test
test can_get_contract_id ... ok

test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.36s
Icon InfoCircle

Note: The first time we run cargo test, cargo will spend some time fetching and building the dependencies for Fuel's Rust SDK. This might take a while, but only the first time!

If all went well, we should see some output that looks like the above!

Icon LinkWriting Tests

Now that we've learned how to setup Rust integration testing in our project, let's try to write some of our own tests!

First, let's update our contract code with a simple counter example:

contract;
 
abi TestContract {
    #[storage(write)]
    fn initialize_counter(value: u64) -> u64;
 
    #[storage(read, write)]
    fn increment_counter(amount: u64) -> u64;
}
 
storage {
    counter: u64 = 0,
}
 
impl TestContract for Contract {
    #[storage(write)]
    fn initialize_counter(value: u64) -> u64 {
        storage.counter.write(value);
        value
    }
 
    #[storage(read, write)]
    fn increment_counter(amount: u64) -> u64 {
        let incremented = storage.counter.read() + amount;
        storage.counter.write(incremented);
        incremented
    }
}
 

To test our initialize_counter and increment_counter contract methods from the Rust test harness, we could update our tests/harness.rs file with the following:

use fuels::{prelude::*, types::ContractId};
 
// Load ABI from JSON
abigen!(TestContract, "out/debug/my-fuel-project-abi.json");
 
async fn get_contract_instance() -> (TestContract, ContractId) {
    // Launch a local network and deploy the contract
    let mut wallets = launch_custom_provider_and_get_wallets(
        WalletsConfig::new(
            Some(1),             /* Single wallet */
            Some(1),             /* Single coin (UTXO) */
            Some(1_000_000_000), /* Amount per coin */
        ),
        None,
    )
    .await;
    let wallet = wallets.pop().unwrap();
 
    let id = Contract::load_from(
        "./out/debug/my-fuel-project.bin",
        LoadConfiguration::default().set_storage_configuration(
            StorageConfiguration::load_from(
                "./out/debug/my-fuel-project-storage_slots.json",
            )
            .unwrap(),
        ),
    )
    .unwrap()
    .deploy(&wallet, TxParameters::default())
    .await
    .unwrap();
 
    let instance = TestContract::new(id.to_string(), wallet);
 
    (instance, id.into())
}
 
#[tokio::test]
async fn initialize_and_increment() {
    let (contract_instance, _id) = get_contract_instance().await;
    // Now you have an instance of your contract you can use to test each function
 
    let result = contract_instance
        .methods()
        .initialize_counter(42)
        .call()
        .await
        .unwrap();
 
    assert_eq!(42, result.value);
 
    // Call `increment_counter()` method in our deployed contract.
    let result = contract_instance
        .methods()
        .increment_counter(10)
        .call()
        .await
        .unwrap();
 
    assert_eq!(52, result.value);
}

Let's build our project once more and run the test:

forc build
$ cargo test
   Compiling my-fuel-project v0.1.0 (/home/mindtree/programming/sway/my-fuel-project)
    Finished test [unoptimized + debuginfo] target(s) in 11.61s
     Running tests/harness.rs (target/debug/deps/integration_tests-373971ac377845f7)

running 1 test
test initialize_and_increment ... ok

test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 1.25s

When cargo runs our test, our test uses the SDK to spin up a local in-memory Fuel network, deploy our contract to it, and call the contract methods via the ABI.

You can add as many functions decorated with #[tokio::test] as you like, and cargo test will automatically test each of them!